PAINT PLUS DIGI GROUNDCOAT

HiGuard is a 100% premium exterior acrylic, developed to give the best coverage for Digital Blue and Green Scenic Paints

Product features:

Self priming on timber Even coverage and consistent sheen Direct application to Tanalised® timber

Typical substrates:

Band sawn timber Bricks/ Blocks Dressed timber Weatherboards Fibre cement board Over coating of elastomeric HiBuild products

Colour and gloss:

Gloss level and description – Satin 15%, Semigloss 25%, Gloss 70%, @ 60 degrees Colour range – whites, pastels, mid tones, dark and extra bright

Surface preparation:

General preparation of the surface to be painted should be completed before commencing application. All loose material must be removed and surface damage or imperfections made good. The surface must be clean, dry and free of contaminants. Areas with a build up of grime must be cleaned with sugar soap or quality equivalent. Previously painted enamel and polyurethane must be sanded to remove gloss.

Application schedule:

Touch dry 20 minutes Re-coat time (minimum) 2 hours Practical coverage 8–12 square meters per litre Dry film thickness @ 10 square meters per litre 41 microns Required number of coats – 2 Application is not recommended if the surface and/ or air temperature is less than 10˚C or is liable to fall below 10˚C during the drying period.

Primer/sealer requirements:

New cementitious surfaces Apply 1 coat of PaintPlus Masonry Sealer Galvanised iron, coil coated steel Apply 1 coat of PaintPlus Galv Coat

Precautions:

The HiGuard rangehas been optimised for exterior application. Therefore it is not recommended for interior living areas. It is not suitable for use on face to face contact surfaces such as windows and door frames.

Environmental qualities:

Manufactured in a carbon neutral certified facility – ISO 14064-1 VOC 3 gms per litre EC07-13 Ecolabel certified – Environmental Choice EC07-13 Licence number 0703012