Description
Easy Sand is primarily designed to seal interior plaster wall board. It has outstanding sanding qualities enhancing the quality of finish that can be achieved with the top coat. Easy Sand is very viscous until stirred and/or application forces of brushing, rolling or spraying are applied. This helps to avoid unsightly lapping lines, spatter and sagging.
Product features:
Very high solids content covers and fills minor surface imperfections
Easy to apply
Sands freely
Adheres to a broad range of surfaces replacing the need for multiple products
Typical areas of use:
Paper faced wall board
Stopping repairs
Fibrous plaster
Skimmed plaster
Colour:
Standard colour is white, may be tinted to light pastel colours.
Surface preparation:
General preparation of the surface to be painted should be completed before commencing application. All loose material must be removed and surface damage or imperfections made good. The surface must be clean, dry and free of contaminants. Areas with a build up of grime must be cleaned with sugar soap or quality equivalent. Previously painted enamel and polyurethane – sand to remove gloss and clean with a lint free cloth.
Application schedule:
Touch dry 15 minutes Re-coat time (minimum) 2 hours Practical coverage 6–10 square meters per litre Dry film thickness @ 10 square meters per litre 46 microns per coat Required number of coats – 1 Application is not recommended if the surface and/ or air temperature is less than 10˚C or is liable to fall below 10˚C during the drying period.
Environmental qualities:
Manufactured in a carbon neutral certified facility – ISO 14064-1 VOC 2 gms per litre EC07-13 Ecolabel certified – Environmental Choice EC07-13 Licence number 0703012
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.