PAINT PLUS CEILING FLAT PAINT

Ceiling Flat is an interior top coat that has almost no gloss reflectance formulated exclusively for ceilings. It enhances the finished appearance by minimising the effect of surface imperfections. Ceiling Flat’s tremendous opacity gives excellent coverage reducing paint requirements and painting times.

Product features:

Dead flat finish – mitigates surface imperfections

Drip and spatter free – no mess to clean up

Low odour – more pleasant work areas

Typical areas of use:

Ceilings

Colour and gloss:

Gloss level and description – dead flat; less than 1% @ 60 degrees Available in white and pastel colours

Surface preparation:

General preparation of the surface to be painted should be completed before commencing application. All loose material must be removed and surface damage or imperfections made good. The surface must be clean, dry and free of contaminants. Areas with a build up of grime must be cleaned with sugar soap or quality equivalent. Previously painted enamel and polyurethane – sand to remove gloss and clean with a lint free cloth. Unpainted surfaces must have a coat of primer, sealer or undercoat applied.

Application schedule:

Touch dry 20 minutes Re-coat time (minimum) 2 hours Practical coverage 10–12 square meters per litre Dry film thickness @ 10 square meters per litre 30 microns Required number of coats – 2 Application is not recommended if the surface and/ or air temperature is less than 10˚C or is liable to fall below 10˚C during the drying period.

Primer/sealer requirements:

New paper-faced wall board Apply 1 coat of PaintPlus Easy Sand. When dry, sand and clean with a lint free cloth. Previously painted surfaces Prime repairs and bare areas with PaintPlus Quick Prep. When dry, sand and clean with a lint free cloth. Enamel and polyurethane Sand to remove gloss and apply 1 coat of PaintPlus Quick Prep. When dry, sand to required level of finish and clean with a lint free cloth. Particle board and fibre board Apply 1 coat of PaintPlus Quick Prep. When dry, sand to required level of finish and clean with a lint free cloth.

Environmental qualities:

Manufactured in a carbon neutral certified facility – ISO 14064-1 VOC 5gms per litre EC07-13 Ecolabel certified – Environmental Choice EC07-13 Licence number 0703012