Description
AQUAKLEAN DIRECTIONS:
After removal of any loose flakey rust by sanding using 320 grit sandpaper, wire brushing and/or wire wheeling to achieve a solid surface profile, it is necessary to remove all surface contamination. Slight residues of grease, oil or even fingerprints can ruin any good paint job. Avoid using any solvent based cleaners which leave residues. Begin by diluting the AquaKlean concentrate with water. The warmer the water, the more effective and powerful the cleaning action of AquaKlean will be. Effective dilution rates will vary according to the type and degree of contaminants as well as surface materials. AquaKlean may be used in power washing equipment. For general purpose cleaning, apply liberally and scrub surface for 5-10 minutes. For heavy-duty cleaning, extended soaking times up to 24 hours or more may be necessary. Use a bristle brush or scouring pad to expedite the cleaning of heavily soiled surfaces. Retreat surface as necessary until clean. Do not allow AquaKlean to dry before rinsing thoroughly with water. After rinsing, let dry. NOTE: Metal surfaces cleaned with AquaKlean should always be treated with RustBlast before painting to ensure proper adhesion. For all alloys and non-ferrous metals, AquaKlean application times and dilution rates should be kept to a minimum due to the wide variations in these materials. For maximum performance, follow with RustBlast to remove surface rust, etch the metal, and leave a zinc phosphate coating (white powder residue) for superior RustSeal adhesion. For all new, smooth or shiny metal surfaces, we recommend a light scuffing with 400 grit sandpaper followed by AquaKlean and RustBlast systems. For previously painted surfaces, remove all paint via chemical stripping followed by AquaKlean and RustBlast systems. If unable to remove any or all paint from metal surfaces, lightly scuff with 400 grit sandpaper followed by AquaKlean. NOTE: If RustSeal is applied over an existing painted coating and not bare metal, it may not permanently seal rust but it will provide a durable, moisture-resistant coating.
AquaKlean deeply penetrates and removes stubborn soil from most surfaces leaving no residues, noxious odours, or flammable solvents. AquaKlean is water-based and can be diluted up to 10 times its volume. Use it in the garage, home, or shop to effectively remove dirt, grime, oils, lubricants, grease, waxes, scum, mildew, algae, road film, and other contaminants. AquaKlean may also be used with power washing equipment to produce rapid penetration through many layers of accumulated build up. Cleaning projects have never been easier!
SIZE:
250ML, 1L, 4L, 15L
Features
Guaranteed pre-paint performance
Protects against corrosion (over 30 days) between cleaning & sealing
Removes dirt, chemicals, fuels & other contaminants
Prepares metal, plastic, concrete & canvas surfaces
Water based, non-corrosive & non-toxic
Phosphate-free & biodegradable
Low-sudsing formulation
Powerful low temperature (3°C) cleaning
Non-flammable
Safe on non-ferrous metals like Aluminium
1Litre
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.